Taiwan Shenglong General-Purpose Waterproof Coating for Kitchen & Bathroom

1. Product Introduction

2. Main Features

1. 1.Can be applied on wet or dry substrates of various materials.
2. 
   2.Tough and high-strength coating with excellent water resistance, weather resistance and durability.
3. 
   3.Cold application, non-toxic, odorless and pollution-free, safe and easy to construct.
4. 
   4.No sagging during application on vertical surfaces, sloped surfaces and ceilings.
5. 
   5.Strong adhesion to the substrate and various surface materials such as cement mortar.

3. Executive Standard

4. Scope of Application

Suitable for waterproofing and damp-proofing works of interior and exterior building walls and floors, such as tunnels, bridges, basements, kitchens, balconies, bathrooms, swimming pools, water storage tanks, etc.

5. Application Method

1. 1.The substrate must be smooth, firm, clean, free of standing water and leakage. Uneven areas and cracks must be filled and leveled; leaking areas must be sealed. Internal and external corners should be made into arc angles.
2. 
   2.Measure accurately according to the factory-specified mixing ratio. Stir the liquid material first, then slowly add the powder while stirring. Proper water can be added to adjust viscosity (preferably before adding powder). Stir fully until the mixture is uniform, free of lumps and precipitation. The prepared mixture should be used up within 2–3 hours.
3. 
   3.Construct layer by layer in sequence according to the selected method. The interval between layers depends on the previous layer being dry and non-tacky. Normally, it takes more than 4 hours for non-walkable construction and more than 8 hours for walkable construction (at 20℃). Longer time is needed in low temperature, high humidity and poor ventilation.
4. 
   4.It is recommended to add and paste non-woven fabric or mesh cloth during application. Lay them flat and brush firmly to avoid blisters.

6. Storage and Transportation

1. 1.Protect from direct sunlight and rain; keep packages intact.
2. 
   2.Store in a cool and dry place at 5–35℃. Shelf life: 12 months.

7. Packaging

• -Packaging specification: Net weight 20kg / pail
• -Formula: 20kg = Liquid 6.2kg + Powder 13.8kg
• -Coverage: 20kg for 2 coats covers about 10–15 ㎡
• -Mixing ratio: Liquid : Powder : Water = 6.2 : 13.8 : 0~1.5 (proper amount of water)
• -Color: Cement gray