1. The base layer should be flat, free of dust and oil, and the surface should be dry.

2. Coating the bottom layer of coating, the first coat of diluted paint, after drying, apply it twice, and the drying time is 2~24h. Then scrape 1~3 times with the putty prepared by the bottom coating, the interval time is 24~48h, and polish with 1# abrasive cloth after drying.

3. Coated the surface layer 2~3 times, and maintain for 3 days after drying.

4. It should be constructed in strict accordance with the prescribed construction order and should not be mixed with other coatings; It must be waterproof and moisture-proof during the construction process; The construction environment should be ventilated and fireproof.

The construction method of silicon propylene resin imitation porcelain coating is as follows:

1. The base layer should be flat, dry, clean, and dust-free, with a moisture content of less than 9%.

2. Roller coating, brush coating, and spraying methods can be constructed, and the coating is applied twice, with an interval of about 2~4h.

3. The amount of paint is about 0.4~0.6kg/m2.

4. Fireworks are prohibited at the construction site, and there are fire prevention measures.

The construction method of water-soluble polyvinyl alcohol imitation porcelain coating is as follows:

1. Clean the base layer according to the general base treatment method.

2. Scrape with a 0.3mm thick elastic scraper, wait for the first time to dry thoroughly, and then scrape the second time, wait for the second coat film to dry until it is not sticky but not completely dry, and use a trowel to press the base material of the original coating when calendering.

3. After the coating film is completely dry, the uneven corners should be polished with fine sandpaper, and the decorative surface should be shiny and smooth, similar to the surface of the tiles

4. This kind of paint is difficult to construct, if the cover coating is not applied, the finish is easy to contaminate and not easy to remove.